Chain for Forklift

Forklift Chain - The life of lift chains on forklifts can be lengthened completely with proper maintenance and care. Like for instance, correct lubrication is actually the most effectual method in order to prolong the service capability of this part. It is really vital to apply oil every so often with a brush or other lube application tool. The volume and frequency of oil application needs to be sufficient to be able to avoid whichever rust discoloration of oil in the joints. This reddish brown discoloration normally signals that the lift chains have not been properly lubricated. If this particular condition has occurred, it is really essential to lubricate the lift chains at once.

During lift chain operation it is common for some metal to metal contact to take place that could lead to several components to wear out sooner or later. When there is 3 percent elongation on the lift chain, it is considered by industry standards to have worn out the chain. So as to prevent the scary possibility of a disastrous lift chain failure from happening, the manufacturer greatly suggests that the lift chain be replaced before it reaches 3% elongation. The lift chain gets longer due to progressive joint wear that elongates the chain pitch. This elongation is capable of being measured by placing a certain number of pitches under tension.

So as to ensure correct lift chain maintenance, another factor to consider is to check the clevis pins on the lift chain for signs of wearing. Lift chains are put together so that the clevis pins have their tapered faces lined up with each other. Usually, rotation of the clevis pins is often caused by shock loading. Shock loading happens when the chain is loose and then suddenly a load is applied. This causes the chain to go through a shock as it 'snaps' under the load tension. With no correct lubrication, in this case, the pins can rotate in the chain's link. If this scenario takes place, the lift chains need to be replaced at once. It is essential to always replace the lift chains in pairs to ensure even wear.


Click to Download the pdf

Forklift Parts

JLG Telehandler Attachments

JLG Attachments - Following retirement in the late 1960's, John L. Grove embarked on on a cross country RV voyage. After spending numerous years establishing his family built crane company with his brother, John had no idea that this journey would bring about the rise of JLG Industries, Inc. The world leader of mobile aerial work platforms and precision materials...

More

---

Parts for Articulated Boom Lift

Articulated Boom Lift Parts - Boom vehicle are often applied by phone, cable television and utilities organizations as they have long folded arms which are commonly folded over the roofs of company vans. On the end of the extension of extendable arms typically sits a bucket-like apparatus. When a bucket vehicle has an extendable boom mounted the roof this is...

More

---

Part for Electric Forklift

Electric Forklift Parts - Utilizing a charging stations is the most common way to be able to charge an electric lift truck battery. The charging station would attach along with the battery by utilizing two 8-foot cords. Newer units are outfitted with an automatic charge shut off. This charges the battery hard for 6 hours, afterward at a lower level...

More

---

Fork Mounted Spreader Bars

Fork Mounted Spreader Bar - Commonly Used Forklift Attachments Safety cages are essential as a safety feature for lift trucks. Commonly they are utilized to be able to raise workers to particular height to allow them to make certain upkeep. What's more, the safety cage can give them access to stored items at a height. Other items for example, are...

More

---

Container Forklift Part

Container Forklift Parts - A lift truck is an instrumental piece of industrial equipment in warehouse and distribution operations to store and transfer merchandise. Their innovative design enables them to fit into tight areas while maintaining agility. The usual function of a forklift is to be able to transfer heavy cargo in the loading and unloading of supplies, but dumping...

More

---

Forklift Pinions

Forklift Pinion - The king pin, normally made from metal, is the major pivot in the steering mechanism of a motor vehicle. The original design was really a steel pin wherein the movable steerable wheel was mounted to the suspension. For the reason that it can freely rotate on a single axis, it restricted the degrees of freedom of movement...

More

---

Safety Equipment for Forklift

Forklift Safety Equipment - There are several industries and operations, for example warehousing, agricultural and manufacturing which make use of powered industrial trucks together with lift trucks or forklift trucks frequently within the workplace. Forklift trucks are used to lower or raise objects or move stuff that are stored in containers or on pallets to other places within the workplace....

More

---

Drive Motor Forklifts

Forklift Drive Motor - MCC's or Motor Control Centersare an assembly of one or more sections that include a common power bus. These have been used in the auto trade since the 1950's, in view of the fact that they were utilized a lot of electric motors. Nowadays, they are utilized in other industrial and commercial applications. Motor control centers...

More

---